Manual Control Safety Valve Test Bench | MAQ Series Safety Valve Calibration Bench

مضخة تعزيز الغاز المعززة: مضخة تعزيز الغاز من سلسلة OMA; مضخة تعزيز الغاز سلسلة OMD; مضخة تعزيز الغاز من سلسلة OMT; مضخة تعزيز الهواء المعززة; نظام تعزيز الغاز المعزز; نظام معزز الهواء

مضخة معززة للسوائل

معدات اختبار مقياس الضغط: جدول معايرة مقياس الضغط; جدول اختبار نبض التعب بمقياس الضغط; منضدة اختبار تسرب الضغط الزائد بمقياس الضغط الزائد; آلة ختم الحواف الذكية ذات غطاء مقياس الضغط الذكي; آلة التسرب الدوارة الأوتوماتيكية لقياس الضغط; آلة تعبئة الزيت الأوتوماتيكية لقياس الضغط

صمامات مشعب الأدوات: صمامات مشعبات الأجهزة - التركيب المباشر (جهاز إرسال بدون حواف); صمامات مشعب الصك - التركيب المباشر (صمامات مشبك الصك - التركيب المباشر (كوبلانار، جهاز إرسال ذو حواف); صمامات مشعب الأدوات - التركيب المباشر (كوبلانار); صمامات مشعب الأدوات - التركيب عن بُعد

صمام إبرة الضغط العالي الضغط

ماكينة معالجة قضبان التوصيل

ضاغط الغاز المختلط

تركيب الطويق

منضدة اختبار صمامات الأمان ذات التحكم اليدوي

مقدمة المنتج

The MAQ Series Safety Valve Calibration Bench is a professional testing system designed for the calibration and performance verification of safety valves under controlled pressure conditions.
The equipment adopts a hydraulic clamping device with adjustable clamping force, and is equipped with a pressure gauge to display the corresponding clamping force.，The equipment is mainly used to test the set pressure, setback pressure, and tightness performance of both direct loaded safety valves and pilot operated safety valves.

With a stable pressure boosting system and reliable mechanical structure, the MAQ series calibration bench is suitable for applications where accurate pressure control and repeatable testing results are required.

احصل على عرض أسعار

وصف المنتج

The MAQ Series Safety Valve Calibration Bench adopts an advanced equipment design principle, integrating pneumatic and hydraulic technologies to achieve stable pressure output and secure valve clamping during testing.
In this system, pneumatic liquid pressurization is used as the clamping pressure source, while a pneumatic gas booster pump is applied as the test pressure source.
The bench is equipped with a gas cylinder, enabling continuous testing operations without frequent interruption.

During operation, the test pressure can be adjusted smoothly, and the pressure rise process remains stable, which helps operators accurately determine valve opening pressure, reseating pressure, and sealing performance.

One testing seat including one clamping unit is used for DN15~DN200 testing, and multiple testing fixtures can be equipped to meet the testing requirements of various series of safety valves.

The test bench can also be customized according to customer required size, pressure, and medium.

البند	MAQ-200/10-3-N	MAQ-400/40-6-BN
Testing Medium	Nitrogen or clean air	Nitrogen or clean air or water
Maximum Diameter	DN200mm	DN400mm
Maximum Test Pressure	10MPa	Gas pressure: 40MPa; water pressure: 80MPa
Testing Accuracy	±0.4%	±0.4%
Material	The valves, fittings, and joints used in the equipment material are all made of stainless steel	When the medium pressure is lower than the required pressure and not less than 3MPa, use 0.3-0.8MPa compressed air as the driving pressure source, and pressurize the medium into the high-pressure tank through a gas booster pump

الميزات والوظائف

Hydraulic clamping device with adjustable clamping force
Equipped with a pressure gauge and clamping force comparison table
Adjustable test pressure with stable pressure rise
Suitable for testing set pressure, setback pressure, and tightness performance
Can be customized for different size, pressure, and medium
Suitable for most gas and liquid media

مزايا المنتج

Adjustable clamping force for different testing pressure and valve diameter
Pressure and clamping force comparison table for convenient operation
Stable pressure rise during testing
Suitable for testing direct loaded safety valves and pilot operated safety valves
Can be customized according to required size, pressure, and medium

Product Advantages:

Stable pressure output improves testing accuracy and repeatability
Adjustable pressure control allows flexible testing of different valve specifications
Reliable clamping system ensures safety during high-pressure testing
Imported high-pressure components enhance system safety and service life
Supports both gas and liquid testing media, expanding application flexibility