For Hydraulic Hydrostatic Housing tightness testing with cylinder clamping, PLC control, and edge sealing applications.
The Hydraulic Hydrostatic Housing Test Bench is a testing device for housing air tightness testing. It as a dedicated test bench for housing sealing / edge sealing testing, with a single-station configuration and PLC control.It is available in two testing methods: hydrostatic testing and pneumatic testing.
The Hydraulic Hydrostatic Housing Test Bench adopts an enclosed cabinet-type structure with cylinder clamping, single-station testing, and PLC control. It is designed for housing edge sealing applications.The clamping force is stronger and that double-station customization is available according to requirements.
| No. | Item | Specification |
| 1 | Name | Hydraulic Hydrostatic Housing Test Bench |
| 2 | Clamping Method | Cylinder Clamping |
| 3 | Station | Single Station (Multi-Station Customizable) |
| 4 | Function | Housing Edge Sealing |
| 5 | Temperature | Room Temperature |
| 6 | Control Method | PLC Control |
| 7 | Note | Please contact customer service for housing diameter parameters |
Sorotan berfokus pada desain dan pembuatan peralatan uji tekanan dan sistem pengujian kontrol fluida, mendukung baik model standar maupun kustomisasi berbasis proyek.
For hydrostatic pressure testing and residual deformation inspection of mobile gas tanks in accordance with national safety standards.
For comprehensive testing of breather valves, hydraulic safety valves, and tank flame arresters used on petroleum storage tanks.
For hydrostatic pressure testing and residual deformation evaluation of seamless gas cylinders under computer-controlled operation.
For air tightness and pressure testing of flow meter housings, supporting both air pressure and water pressure test methods.
For simulated deep-sea water pressure testing and sealing performance verification of workpieces using pressurized pure water.
For supercritical CO2 extraction applications with preparation station, extraction and separation, and electrical control modules.
For discharge hose air tightness testing, pressure resistance testing, static conductivity testing, and related performance inspection applications.
For atmospheric tank truck safety component detection, including emergency relief device pressure testing and built-in breathing valve opening pressure inspection.
For integrated inspection and performance verification of oil tank breathing valves, hydraulic relief valves, and flame arresters in accordance with CNPC standards.
For tank truck breathing valve testing, external flange and threaded valve inspection, and vacuum valve verification.
For tank truck component inspection, multi-item pressure testing and comprehensive valve verification.
For static pressure resistance and burst testing of hoses, pipes, joints, pressure vessels, and other pressure components in compliance with international and domestic test standards.
For amplifying low-pressure gas into stable high-pressure output in high-pressure and large-flow gas applications.
Kami akan membalas Anda dalam waktu 24 jam. Jika untuk kasus mendesak, silakan tambahkan WhatsApp/WeChat: +86 18353183710,. Atau hubungi +86 19033618106 langsung.
*Kami menghormati kerahasiaan Anda dan semua informasi dilindungi.
Kami hanya akan menggunakan informasi Anda untuk merespons pertanyaan Anda dan tidak akan pernah mengirimkan email tidak diminta atau pesan promosi.
