Manual Control Safety Valve Test Bench | MAQ Series Safety Valve Calibration Bench

홈 > 제품

안전 밸브 테스트 벤치

밸브 테스트 벤치

압력 테스트 장비

가스 부스터 펌프: OMA 시리즈 가스 부스터 펌프; OMD 시리즈 가스 부스터 펌프; OMT 시리즈 가스 부스터 펌프; 에어 부스터 펌프; 가스 부스터 시스템; 에어 부스터 시스템

액체 부스터 펌프

압력 게이지 테스트 장비: 압력 게이지 보정 표; 압력 게이지 피로 펄스 테스트 테이블; 압력 게이지 과압 누출 테스트 벤치; 압력 게이지 커버 지능형 엣지 씰링 기계; 압력 게이지 케이스 자동 회전식 누설 기계; 압력 게이지 자동 오일 주입기

계기 매니폴드 밸브: 계기 매니폴드 밸브-직접 장착(비플랜지 트랜스미터); 계기 매니폴드 밸브-직접 장착(코플레너, 플랜지 트랜스미터); 계기 매니폴드 밸브-직접 장착(코플레너); 계기 매니폴드 밸브-원격 마운트

고압 니들 밸브

버스바 가공 기계

혼합 가스 압축기

페룰 피팅

수동 제어 안전 밸브 테스트 벤치

제품 소개

The MAQ Series Safety Valve Calibration Bench is a professional testing system designed for the calibration and performance verification of safety valves under controlled pressure conditions.
The equipment adopts a hydraulic clamping device with adjustable clamping force, and is equipped with a pressure gauge to display the corresponding clamping force.，The equipment is mainly used to test the set pressure, setback pressure, and tightness performance of both direct loaded safety valves and pilot operated safety valves.

With a stable pressure boosting system and reliable mechanical structure, the MAQ series calibration bench is suitable for applications where accurate pressure control and repeatable testing results are required.

견적 받기

제품 설명

The MAQ Series Safety Valve Calibration Bench adopts an advanced equipment design principle, integrating pneumatic and hydraulic technologies to achieve stable pressure output and secure valve clamping during testing.
In this system, pneumatic liquid pressurization is used as the clamping pressure source, while a pneumatic gas booster pump is applied as the test pressure source.
The bench is equipped with a gas cylinder, enabling continuous testing operations without frequent interruption.

During operation, the test pressure can be adjusted smoothly, and the pressure rise process remains stable, which helps operators accurately determine valve opening pressure, reseating pressure, and sealing performance.

One testing seat including one clamping unit is used for DN15~DN200 testing, and multiple testing fixtures can be equipped to meet the testing requirements of various series of safety valves.

The test bench can also be customized according to customer required size, pressure, and medium.

항목	MAQ-200/10-3-N	MAQ-400/40-6-BN
Testing Medium	Nitrogen or clean air	Nitrogen or clean air or water
Maximum Diameter	DN200mm	DN400mm
최대 테스트 압력	10MPa	Gas pressure: 40MPa; water pressure: 80MPa
Testing Accuracy	±0.4%	±0.4%
Material	The valves, fittings, and joints used in the equipment material are all made of stainless steel	When the medium pressure is lower than the required pressure and not less than 3MPa, use 0.3-0.8MPa compressed air as the driving pressure source, and pressurize the medium into the high-pressure tank through a gas booster pump

특징 및 기능

Hydraulic clamping device with adjustable clamping force
Equipped with a pressure gauge and clamping force comparison table
Adjustable test pressure with stable pressure rise
Suitable for testing set pressure, setback pressure, and tightness performance
Can be customized for different size, pressure, and medium
Suitable for most gas and liquid media

제품 이점

Adjustable clamping force for different testing pressure and valve diameter
Pressure and clamping force comparison table for convenient operation
Stable pressure rise during testing
Suitable for testing direct loaded safety valves and pilot operated safety valves
Can be customized according to required size, pressure, and medium

제품 이점:

Stable pressure output improves testing accuracy and repeatability
Adjustable pressure control allows flexible testing of different valve specifications
Reliable clamping system ensures safety during high-pressure testing
Imported high-pressure components enhance system safety and service life
Supports both gas and liquid testing media, expanding application flexibility