The Supercritical CO2 Extraction Equipment is an integrated extraction system composed of a preparation station module, an extraction and separation module, and an electrical control cabinet module. The system is designed for supercritical CO2 extraction processing, where the customer prepares a sufficient amount of CO2 medium and connects it to the inlet pipeline of the equipment.
The equipment uses CO2 as the extraction medium and completes the process through liquefaction, boosting, heating to supercritical state, extraction inside the reactor, and separation inside the separator tank.
This supercritical CO2 extraction system is divided into three functional modules.
The preparation station module includes a water chiller, chilled water tank, cooling tank, and a dedicated CO2 gas-liquid booster pump. Its main function is to liquefy the CO2 from the gas cylinder and maintain the CO2 in liquid form at low temperature, then boost the pressure through the booster pump.
The extraction and separation module includes an extraction reactor, separation tank, heating water tank, equipment operation box, control valves, and pressure gauges. Its main function is to heat the CO2 to a supercritical state and pressurize it. The raw material is immersed in the reactor for extraction, and the extracted CO2 then enters the separation tank, where the essence is separated from the CO2 through changes in pressure and temperature.
The electrical control cabinet module is used for overall temperature control, pressure collection integration, total power switching control, and booster pump start-stop control. It also acts as the main power distribution point for the preparation station module and the extraction and separation module.
Артикул
Технические характеристики
System Composition
Preparation station module, extraction and separation module, electrical control cabinet module
Extraction Medium
CO2 provided by customer
Maximum Operating Pressure
42 MPa
Maximum Total Power Consumption
52 KW
Maximum Total Compressed Air Consumption
2.5 m³/min
Preparation Station Power Consumption
10 KW
Extraction & Separation Power Consumption
38 KW
Preparation Station Air Consumption
1 m³/min
Extraction & Separation Air Consumption
1.5 m³/min
Reactor Design Pressure Resistance
45 MPa
Separation Tank Design Pressure Resistance
32 МПа
Preparation Station Pressure Resistance
12 MPa before booster pump / 45 MPa after booster pump
Preparation Station Footprint
Approx. 2.4 × 2.1 × 1.75 m
Extraction & Separation Footprint
Approx. 3.6 × 1.75 × 3 m
Electrical Control Cabinet Footprint
Approx. 0.8 × 1.25 × 1.85 m
Особенности и функции
Three-module system design: preparation station, extraction and separation, and electrical control cabinet
Low-temperature preparation section used to keep CO2 in liquid state before boosting
Pressure boosting system dedicated to CO2 process handling
Heating section used to raise CO2 to supercritical condition before extraction
Extraction process based on long-time immersion of raw materials in supercritical CO2 inside the reactor
Separation process completed through pressure and temperature changes in the separation tank
Integrated temperature control, pressure collection, and total power control in the electrical control cabinet
Преимущества продукции
Clear modular structure, with each section assigned to preparation, extraction/separation, and electrical control respectively
Dedicated CO2 process design, including liquefaction, boosting, heating, extraction, and separation steps
Defined pressure design for each module, including 45 MPa reactor pressure resistance and 32 MPa separator pressure resistance
Integrated control capability, covering temperature control, pressure acquisition, and booster pump switching within the electrical cabinet
Complete system workflow, from CO2 preparation to final extraction separation, is fully described in the provided materials
Преимущества нашей компании
Highlight специализируется на разработке и производстве оборудования для испытания давлением и систем контроля жидкостей, поддерживая как стандартные модели, так и индивидуальные проекты.
16+ лет работы в области оборудования для испытания давлением и систем пневматического наддува
Годовая производственная мощность: 1000+ комплектов оборудования
8000+ обслуживаемых клиентов
Внедрение системы управления качеством на основе ISO9001 и стабильный контроль производства
Сильная команда инженеров для настройки испытательного стенда, подбора приспособлений и технической поддержки
Опыт работы с иностранными покупателями в области технической коммуникации и документации
Module Composition
The Supercritical CO2 Extraction Equipment consists of three main modules:
1. Preparation Station Module
Used for CO2 liquefaction and pressure boosting, including the cooling system and CO2-specific booster pump.
2. Extraction and Separation Module
Used for supercritical extraction inside the reactor and material separation inside the separation tank.
3. Electrical Control Cabinet Module
Used for temperature control, pressure collection, main power distribution, and booster pump operation control.
Simply Efficien
Taking the example of a bending connection, laser tube cutting is 49% more time-efficient and 31% more cost-efficient per part.
Two high-quality synchronous rotating chucks ensure the tube is held steady. Dual chucks help reduce tube vibration to a minimum, guaranteeing high accuracy in even complex tube configurations at high cutting speed. Suitable for cutting a range of tube diameters from Ø20 mm to Ø200 mm and various wall thicknesses.
Мы ответим вам в течение 24 часов. Если для срочного случая, пожалуйста, добавьте WhatsApp/WeChat: +86 18353183710,. Или позвоните по телефону +86 18353183710.
*Мы уважаем вашу конфиденциальность и защищаем всю информацию.
Мы будем использовать вашу информацию только для ответа на ваш запрос и никогда не будем отправлять нежелательные электронные письма или рекламные сообщения.
