For liquid fatigue testing, pulse cycle control and automatic stop-and-alarm operation.
The Liquid Test Fatigue Test Bench uses hydraulic drive, and the output oil (water) pressure is proportional to the hydraulic pump pressure.
By adjusting the pressure of the driving hydraulic source, the low-pressure oil (water) is pressurized into high-pressure oil (water).
The pulse pressure is set by the pressure controller, so that the system automatically unloads after reaching the pressure and can repeatedly pressurize and cycle the test.
The equipment automatically stops when the set pulse number is reached.
It has the characteristics of:
| Артикул | Технические характеристики |
| Product Name | Жидкостные испытания Стенд для испытаний на усталость |
| Type | Liquid-driven control system |
| Тестовая среда | Hydraulic oil or water |
| Test Pressure | 1.6–6MPa / 10–60MPa / 25–160MPa / 60–400MPa |
| Pulse Frequency | Can be set within the range of 0.5–1Hz |
| Number of Test Pieces at the Same Time | Designed according to customer requirements, each piece can be controlled separately |
| Connector | Special pressure gauge quick connector is standard |
| Number of Single Cycles | Up to 1 million times (can be set) |
| Control Mode | Computer control |
| Software | Written in Labview |
| Setting Function | Test pressure, pulse number, pulse frequency |
| Stop / Alarm | It will automatically stop and alarm when the number of tests is reached |
Highlight специализируется на разработке и производстве оборудования для испытания давлением и систем контроля жидкостей, поддерживая как стандартные модели, так и индивидуальные проекты.
For pressure gauge cover edge sealing, mold forming assembly and touch-screen controlled operation.
For ordinary pressure gauge calibration, automated pressure testing and professional verification agencies.
For ordinary pressure gauge calibration, PLC-controlled test systems and professional inspection agencies.
For precision pressure gauge calibration, pressure instrument verification and professional metrology agencies.
For pressure gauge calibration laboratories, instrument maintenance departments and professional inspection agencies.
For flange pressure gauge calibration, instrument testing departments, calibration laboratories and professional inspection agencies.
For pressure gauge manufacturers, instrument laboratories, industrial testing departments and professional calibration agencies.
For pressure instrument manufacturers, laboratories, industrial manufacturing industries and professional inspection agencies.
For low pressure gauge overpressure leak detection, pressure holding testing and automatic result determination.
For high pressure gauge overpressure leak testing, pressure mode selection and automatic output pressure control.
For micro-pressure gauge overpressure leak testing, 29-station testing and PLC-controlled operation.
For pressure gauge calibration laboratories, high-pressure testing departments, instrument manufacturers and professional inspection agencies.
For pressure gauge oil filling, automatic metering and multi-station filling operation.
For pressure gauge cover tightening, leak detection testing and automatic qualification determination.
For pressure pulse fatigue testing, pressure gauge and sensor evaluation, and automated cycle test control.
Мы ответим вам в течение 24 часов. Если для срочного случая, пожалуйста, добавьте WhatsApp/WeChat: +86 18353183710,. Или позвоните по телефону +86 18353183710.
*Мы уважаем вашу конфиденциальность и защищаем всю информацию.
Мы будем использовать вашу информацию только для ответа на ваш запрос и никогда не будем отправлять нежелательные электронные письма или рекламные сообщения.
