Bàn thử nghiệm ống xả MDHT-50/150-C

Dùng để kiểm tra độ kín khí của ống xả, kiểm tra khả năng chịu áp lực, kiểm tra độ dẫn điện tĩnh và các ứng dụng kiểm tra hiệu suất liên quan.

Bàn thử nghiệm ống xả MDHT-50/150-C

Bàn thử nghiệm ống xả MDHT-50/150-C
Bàn thử nghiệm ống xả MDHT-50/150-C

Giới thiệu sản phẩm

Discharge Hose Test Bench MDHT-50/150-C is a testing device used for the performance test of discharge hoses. It is suitable for the hydraulic pressure test, air tightness test, and static conductivity performance test of the discharge hose of the tank truck.

The equipment supports manual installation and valve control during the test process, and is designed to complete multiple hose performance checks on one test bench.

Mô tả sản phẩm

The MDHT-50/150-C Discharge Hose Test Bench is specially used for the performance testing of tank truck discharge hoses. The equipment is applied to test whether the discharge hose meets the required performance in terms of air tightness, pressure resistance, and static conductivity.

Through the air intake system and the water intake system, the discharge hose is subjected to a certain pressure value. The tightness and pressure resistance performance of the discharge hose are determined by observing whether there is air leakage or water leakage. At the same time, through the digital display of the ohm value of the resistance test instrument, the resistance value between the two ends of the discharge hose can be directly detected, thereby completing the static conductivity test function of the discharge hose.

The test bench is mainly composed of an operating test box, a cylinder, a drain valve, a ball valve, an ohmmeter, a needle valve, a steering valve, a pressure gauge, and a male end connector.

NO Project Requirements Performance Indicators Notes
1 Test subjects Discharge hose
2 Related standards GB18564.1-2019
3 Air tightness test Nominal pressure of hose Gas test
4 Pressure resistance test 1.5 times the nominal pressure of hose Water
5 Static conductivity test Less than or equal to 5Ω

Product Features and Functions

  • Supports air tightness, pressure resistance, and static conductivity tests
  • Uses air intake and water intake systems for testing
  • Checks performance through air leakage and water leakage observation
  • Displays ohm value for static conductivity testing
  • Supports manual installation and valve control

 

Ưu điểm của sản phẩm

  • Three test functions in one bench
  • Direct leakage and resistance detection
  • Based on GB18564.1-2019
  • Suitable for discharge hose performance testing

 

Những thế mạnh của công ty chúng tôi

Highlight chuyên về thiết kế và sản xuất thiết bị thử áp lực và hệ thống kiểm tra điều khiển lưu chất, cung cấp cả các mẫu tiêu chuẩn lẫn các giải pháp tùy chỉnh theo yêu cầu dự án.

  • Hơn 16 năm chuyên về thiết bị thử áp lực và hệ thống tăng áp khí nén
  • Công suất sản xuất hàng năm: Hơn 1.000 bộ thiết bị
  • Đã phục vụ hơn 8.000 khách hàng
  • Triển khai hệ thống quản lý chất lượng theo tiêu chuẩn ISO 9001 và kiểm soát sản xuất ổn định
  • Đội ngũ kỹ sư giàu kinh nghiệm chuyên về thiết lập hệ thống thử nghiệm, điều chỉnh thiết bị cố định và hỗ trợ kỹ thuật
  • Có kinh nghiệm xuất khẩu trong việc hỗ trợ khách hàng quốc tế về truyền thông kỹ thuật và tài liệu kỹ thuật

 

 

Sản phẩm được đề xuất

Yêu cầu báo giá

    Chúng tôi sẽ trả lời quý khách trong vòng 24 giờ. Nếu trường hợp khẩn cấp, vui lòng thêm số WhatsApp/WeChat: +86 18353183710. Hoặc gọi trực tiếp đến số +86 18353183710.

    *Chúng tôi tôn trọng quyền riêng tư của quý khách và tất cả thông tin đều được bảo mật.

    Chúng tôi chỉ sử dụng thông tin của bạn để trả lời câu hỏi của bạn và sẽ không bao giờ gửi email hoặc tin nhắn quảng cáo không được yêu cầu.