The MHV-HB600/24-S integrates hydraulic clamping, electrical control, and high/low pressure water supply into a single test station. The horizontal layout simplifies loading and positioning of large flange valves, while the claw clamp mechanism presses and fixes the valve at the flange end face to maintain stable sealing conditions during testing.
To improve operating convenience for large valves, the worktable design supports 90° rotation and left–right movement, making it easier to access sealing interfaces and adapt to different valve face-to-face lengths. The overall structure is engineered to meet workshop hydrostatic test and sealing test procedures for DN250–DN600 valves.
| Categoria |
Item |
Especificação |
| Geral |
Tipo de produto |
Horizontal Claw Clamp Valve Test Bench |
| Geral |
Modelo |
MHV-HB600/24-S |
| Geral |
Gama de tamanhos da válvula |
DN250–DN600 (250–600 mm) |
| Pressure Capability |
Max Test Pressure Range |
Up to 24.0 MPa (depends on valve size & nominal pressure class) |
| Meio de teste |
Meio de teste hidrostático |
Água |
| Low-Pressure Test |
Low-Pressure Tightness Condition |
4–7 bar (as specified in the technical notes) |
| Vedação |
Vedação da placa cega da válvula |
Anel de vedação na extremidade |
| Mechanical Range |
Valve Face-to-Face Length |
610–1067 mm |
| Mechanical Range |
Flange Outer Diameter Range |
460–840 mm |
| Mechanical Range |
Flange Thickness Range |
26–70 mm |
| Motion |
Worktable Rotation |
90° rotation |
| Motion |
Worktable Width/Spacing Range |
450–1500 mm |
| Fixação |
Clamp Cylinders (Left/Right) |
4 × Ø180 mm |
| Fixação |
Força máxima de aperto |
200 tons |
| Tamanho da válvula |
Gama de pressão nominal |
Intervalo de pressão de ensaio |
| DN250 |
1.6–16.0 MPa |
1.6–24.0 MPa |
| DN300 |
1.6–10.0 MPa |
1.6–15.0 MPa |
| DN350 |
1.6–6.4 MPa |
1.6–9.6 MPa |
| DN400 |
1.6–4.0 MPa |
1.6–6.0 MPa |
| DN450 |
1.6–4.0 MPa |
1.6–6.0 MPa |
| DN500 |
1.6–2.5 MPa |
1.6–3.75 MPa |
| DN600 |
1.6–2.5 MPa |
1.6–3.75 MPa |
Caraterísticas e funções do produto
- Heavy-duty horizontal claw clamp structure for DN250–DN600 flange valves
- End-face O-ring sealing between valve and blind plate, suitable for standard workshop sealing requirements
- Supports hydrostatic strength testing and high-pressure sealing testing workflows
- Supports 4–7 bar low-pressure tightness test condition as required in the procedure
- 90° rotatable worktable for better access during sealing and tightness inspection
- Left–right worktable movement to adapt to different valve lengths without re-fixturing
- High clamping capacity (200 tons) for stable holding during large-valve pressure tests
- Integrated station structure combining hydraulic system, control cabinet, and test circuits
Vantagens do produto
- Stronger clamping and wider mechanical range for large valve bodies (DN250–DN600)
- Stable hydrostatic test workflow with size-matched pressure capability
- Improved operability through rotation and movement functions, reducing handling difficulty for large valves
- Broad flange compatibility across multiple flange OD and thickness ranges
- Workshop-ready design for repeatable valve pressure testing, sealing verification, and inspection preparation
A força da nossa empresa
Highlight is a professional manufacturer focused on pressure testing equipment and fluid control testing systems, supporting both standard production models and project-based configurations.
- 16+ years of experience in pressure testing and boosting equipment
- Capacidade de produção anual: mais de 1000 conjuntos de equipamentos
- Mais de 8000 clientes atendidos
- Engineering team with extensive experience in test bench configuration and system integration
- Stable manufacturing process and quality control for long-term industrial use
- Export support experience for international buyers (documentation, configuration communication, and technical assistance)
Clamping and Worktable Design Logic
To improve repeatability and handling efficiency for large valves, the MHV-HB600/24-S applies a combined mechanical structure:
- Claw clamp pressing on flange end face: ensures stable positioning during pressure buildup and reduces movement risk under test pressure.
- High-capacity hydraulic clamping system (200 tons): designed for large-size valves and higher holding requirements.
- 90° rotatable worktable: improves accessibility for sealing inspection, tool positioning, and valve handling.
- Wide mechanical adaptability: supports valve length 610–1067 mm, flange OD 460–840 mm, and flange thickness 26–70 mm, covering typical DN250–DN600 flange valve formats.
