Manifold Instrumen 2-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)

Untuk instalasi pemancar tekanan ringkas dan tidak bergelang yang membutuhkan isolasi andal, pematian yang aman, dan pengoperasian yang stabil dalam sistem pengukuran proses.

Meja Uji Katup Keselamatan

Meja Uji Katup

Peralatan Uji Tekanan

Tank Accessory Test bench

Pompa Pendorong Gas

Pompa Pendorong Gas Seri OMA
Pompa Pendorong Gas Seri OMD
Pompa Pendorong Gas Seri OMT
Pompa Pendorong Udara
Sistem Pendorong Gas

Pompa Pendorong Cair

Peralatan Uji Alat Ukur Tekanan

Tabel Kalibrasi Alat Ukur Tekanan
Tabel Uji Pulsasi Kelelahan Alat Ukur Tekanan
Meja Uji Kebocoran Tekanan Alat Ukur Tekanan
Mesin Penyegel Cerdas Penutup Alat Ukur Tekanan
Mesin Kebocoran Putar Otomatis Casing Alat Ukur Tekanan
Mesin Pengisian Minyak Otomatis Alat Ukur Tekanan

Katup Manifold Instrumen

Katup Manifold Instrumen– Pemasangan Langsung (Transmitter Tanpa Flange)
Katup Manifold Instrumen – Pemasangan Langsung (Transmitter Coplanar, Flanged)
Katup Manifold Instrumen – Pemasangan Langsung (Coplanar)
Katup Manifold Instrumen – Pemasangan Jauh

Katup Jarum Tekanan Tinggi

Mesin Pengolahan Busbar

Kompresor Gas Campuran

Fitting Ferrule

Manifold Instrumen 2-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)

Manifold Instrumen 2-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)
Manifold Instrumen 2-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)
Manifold Instrumen 2-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)
Manifold Instrumen 2-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)

pengantar produk

The 2-valve direct mount instrument manifold is suitable for compact, non-flanged pressure transmitters. Back-seating in the fully open position protects packing integrity and improves service safety. The two-piece stem design uses a hardened, non-rotating lower stem to minimize friction and wear. A screw-locked handle ensures stable operation, while stem thread lubrication is isolated from the process medium. All manifolds are pressure-tested at rated working pressure before shipment.

 

Dapatkan Penawaran

Deskripsi Produk

The 2-Valve Instrument Manifold – Direct Mount (Non-Flanged Transmitter) is a block-type manifold designed for direct installation on differential pressure transmitters without flange connection.
It integrates two isolation valves within a compact body to control the high-pressure and low-pressure impulse lines of the transmitter.

The manifold connects to the process through 1/2 NPT threaded ports and mounts directly to the transmitter interface, forming a compact impulse line assembly without additional tubing adapters.
A 1/4 NPT vent/test port is provided for pressure release, calibration, or test connection.

The structure is specifically designed for coplanar or similar non-flanged pressure transmitters, enabling stable mechanical installation and reliable pressure sealing between the process line and the instrument.
The integrated block design reduces connection points and improves installation integrity in pressure measurement systems.

katup bermacam-macam instrumen

Tidak. Komponen 316 Baja Tahan Karat (Kelas Material / Spesifikasi ASTM) Paduan C-276 (Kelas Material / Spesifikasi ASTM)
1 Menangani Paduan Aluminium  Paduan Aluminium
2 Atur Sekrup 304 Baja Tahan Karat 304 Baja Tahan Karat
3 Kelenjar Pengepakan 304 Baja Tahan Karat / A479  304 Baja Tahan Karat / A479
4 Batang Katup Atas 316 Baja Tahan Karat / A479  304 Baja Tahan Karat / A479
5 Mur Pengunci Baja tahan karat  Baja tahan karat
6 Bonnet 316 Baja Tahan Karat / A479 Paduan C-276 / B574
7 Mengemas Cincin Kelenjar 316 Baja Tahan Karat / A479 316 Baja Tahan Karat / A479
8 Pengepakan PTFE atau Grafit PTFE atau Grafit
9 Pin Alur Baja tahan karat Baja tahan karat
10 Batang Katup Bawah Baja Tahan Karat 316 yang Diperkeras / A479 Paduan C-276 / B574
11 Badan Katup 316 Baja Tahan Karat / A479; 316 Baja Tahan Karat / A182 Paduan C-276 / B564
— Pelumas Berbasis Molibdenum Disulfida Berbasis Molibdenum Disulfida

 

katup bermacam-macam instrumen

 

 

Fitur dan Fungsi

  • Two isolation valves for high- and low-pressure impulse lines
  • Direct mounting to compact pressure transmitters
  • Back-seat sealing in fully open position
  • Non-rotating hardened lower stem design
  • Screw-locked handle for vibration resistance
  • Integrated vent/test port for calibration
  • Thread lubrication isolated from process media
  • Compact block-type manifold structure

 

Keunggulan Produk

Improved sealing safety
Back-seat structure protects packing and prevents leakage during full opening.

Reduced stem wear
Non-rotating lower stem minimizes friction and extends service life.

Stable operation
Screw-locked handle prevents loosening under vibration or pulsation conditions.

Contamination-free sealing
Stem thread lubrication isolated from process medium ensures clean pressure transmission.

Compact installation
Direct mount structure reduces tubing connections and leak points.

 

Manifold Instrumen 2-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)

This type of valve manifold is specially designed for Rosemount “coplanar” pressure transmitters (including models 3051C, 3051S, 2024 and 3095).
The standard configuration of each valve manifold of this model includes four 7/16″ UNF × 2.08″ high-strength bolts. It can be directly mounted to the transmitter.

 

Keunggulan Perusahaan Kami

  • 16+ tahun mengkhususkan diri dalam pengujian tekanan dan R&D peralatan penguat pneumatik dan manufaktur
  • Kapasitas produksi tahunan melebihi 1000+ set peralatan
  • Dipercaya oleh 8000+ pelanggan global
  • Perusahaan Teknologi Tinggi Nasional dengan 28+ paten
  • Tim teknik dengan pengalaman industri lebih dari 10 tahun
  • Anggota Asosiasi Industri Peralatan Khusus China
  • Anggota Komite Standardisasi Instrumentasi Nasional
  • Sistem manajemen mutu bersertifikat ISO 9001
  • Produk bersertifikat CE untuk kepatuhan internasional
  • Berfokus pada pasar instrumentasi industri kelas menengah ke atas

 

 

< Previous: 5-Valve Instrument Manifold – Direct Mount (Coplanar, Flanged Transmitter) Next: 3-Valve Instrument Manifold – Direct Mount (Non-Flanged Transmitter) >

Produk yang Direkomendasikan

Dapatkan Penawaran

    Kami akan membalas Anda dalam waktu 24 jam. Jika untuk kasus mendesak, silakan tambahkan WhatsApp/WeChat: +86 18353183710,. Atau hubungi +86 19033618106 langsung.

    *Kami menghormati kerahasiaan Anda dan semua informasi dilindungi.

    Kami hanya akan menggunakan informasi Anda untuk merespons pertanyaan Anda dan tidak akan pernah mengirimkan email tidak diminta atau pesan promosi.