Manifold Instrumen 5-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)

Untuk aplikasi pengukuran tekanan diferensial yang memerlukan isolasi andal, kontrol ekualisasi, dan kinerja pematian yang aman di lingkungan bertekanan tinggi.

Meja Uji Katup Keselamatan

Meja Uji Katup

Peralatan Uji Tekanan

Tank Accessory Test bench

Pompa Pendorong Gas

Pompa Pendorong Gas Seri OMA
Pompa Pendorong Gas Seri OMD
Pompa Pendorong Gas Seri OMT
Pompa Pendorong Udara
Sistem Pendorong Gas

Pompa Pendorong Cair

Peralatan Uji Alat Ukur Tekanan

Tabel Kalibrasi Alat Ukur Tekanan
Tabel Uji Pulsasi Kelelahan Alat Ukur Tekanan
Meja Uji Kebocoran Tekanan Alat Ukur Tekanan
Mesin Penyegel Cerdas Penutup Alat Ukur Tekanan
Mesin Kebocoran Putar Otomatis Casing Alat Ukur Tekanan
Mesin Pengisian Minyak Otomatis Alat Ukur Tekanan

Katup Manifold Instrumen

Katup Manifold Instrumen– Pemasangan Langsung (Transmitter Tanpa Flange)
Katup Manifold Instrumen – Pemasangan Langsung (Transmitter Coplanar, Flanged)
Katup Manifold Instrumen – Pemasangan Langsung (Coplanar)
Katup Manifold Instrumen – Pemasangan Jauh

Katup Jarum Tekanan Tinggi

Mesin Pengolahan Busbar

Kompresor Gas Campuran

Fitting Ferrule

Manifold Instrumen 5-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)

Manifold Instrumen 5-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)
Manifold Instrumen 5-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)
Manifold Instrumen 5-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)
Manifold Instrumen 5-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)

pengantar produk

The 5-valve direct mount instrument manifold for non-flanged transmitters provides full isolation, equalization, and venting capabilities in a compact design. Back-seating in the open position improves sealing safety and packing protection. The hardened, non-rotating lower stem minimizes wear during repeated operation cycles, while upper stem lubrication is isolated from the process medium. All manifolds undergo pressure sealing tests at rated working pressure before shipment.

 

Dapatkan Penawaran

Deskripsi Produk

The 5-valve direct mount instrument manifold is engineered for direct installation on non-flanged differential pressure transmitters used in demanding process industries. The manifold combines two isolation valves, one balance valve, and two bleed /test valves to provide full pressure control during operation, calibration, and maintenance.

The back-seating valve design enhances sealing reliability when fully open, protecting packing integrity. A two-piece stem with a hardened non-rotating lower section minimizes friction and wear, ensuring long-term stability. The roll-hardened upper stem thread is lubricated and isolated from process media, improving durability and cleanliness.

Each manifold is precision-machined from high-strength material and factory pressure-tested at rated working pressure before shipment to ensure safety and leak-tight performance.

katup bermacam-macam instrumen

Tidak. Komponen 316 Baja Tahan Karat (Kelas Material / Spesifikasi ASTM) Paduan C-276 (Kelas Material / Spesifikasi ASTM)
1 Menangani Paduan Aluminium  Paduan Aluminium
2 Atur Sekrup 304 Baja Tahan Karat 304 Baja Tahan Karat
3 Kelenjar Pengepakan 304 Baja Tahan Karat / A479  304 Baja Tahan Karat / A479
4 Batang Katup Atas 316 Baja Tahan Karat / A479  304 Baja Tahan Karat / A479
5 Mur Pengunci Baja tahan karat  Baja tahan karat
6 Bonnet 316 Baja Tahan Karat / A479 Paduan C-276 / B574
7 Mengemas Cincin Kelenjar 316 Baja Tahan Karat / A479 316 Baja Tahan Karat / A479
8 Pengepakan PTFE atau Grafit PTFE atau Grafit
9 Pin Alur Baja tahan karat Baja tahan karat
10 Batang Katup Bawah Baja Tahan Karat 316 yang Diperkeras / A479 Paduan C-276 / B574
11 Badan Katup 316 Baja Tahan Karat / A479; 316 Baja Tahan Karat / A182 Paduan C-276 / B564
— Pelumas Berbasis Molibdenum Disulfida Berbasis Molibdenum Disulfida

 

katup bermacam-macam instrumen

 

Product Features & Functions

Five-Valve Integrated Control
Provides complete isolation, equalization, venting, and testing functions required for differential pressure transmitters.

Back-Seating Safety Design
Back-seal protects packing when valve is fully open, improving operational safety and service life.

Non-Rotating Hardened Lower Stem
Reduces packing wear and internal friction, ensuring smooth and reliable operation.

Dual Vent/Test Capability
Enables independent venting or calibration on both high and low pressure sides.

Direct Mount Compact Structure
Minimizes leakage points and installation space while improving system rigidity.

 

Keunggulan Produk

  • Full differential pressure control in one compact manifold
  • Reduced leakage risk compared with remote piping
  • Safer maintenance and transmitter calibration
  • Longer packing and stem service life
  • Stable sealing under high pressure conditions
  • Easy installation on non-flanged DP transmitters

 

Manifold Instrumen 5-Katup - Pemasangan Langsung (Pemancar Tanpa Flensa)

This type of valve manifold is specially designed for Rosemount “coplanar” pressure transmitters (including models 3051C, 3051S, 2024 and 3095).
The standard configuration of each valve manifold of this model includes four 7/16″ UNF × 2.08″ high-strength bolts. It can be directly mounted to the transmitter.

 

Keunggulan Perusahaan Kami

  • 16+ tahun mengkhususkan diri dalam pengujian tekanan dan R&D peralatan penguat pneumatik dan manufaktur
  • Kapasitas produksi tahunan melebihi 1000+ set peralatan
  • Dipercaya oleh 8000+ pelanggan global
  • Perusahaan Teknologi Tinggi Nasional dengan 28+ paten
  • Tim teknik dengan pengalaman industri lebih dari 10 tahun
  • Anggota Asosiasi Industri Peralatan Khusus China
  • Anggota Komite Standardisasi Instrumentasi Nasional
  • Sistem manajemen mutu bersertifikat ISO 9001
  • Produk bersertifikat CE untuk kepatuhan internasional
  • Berfokus pada pasar instrumentasi industri kelas menengah ke atas

 

Aplikasi Khas

  • Pemancar tekanan diferensial
  • Flow measurement systems
  • Level measurement systems
  • Pressure balancing and calibration loops
  • Process instrumentation lines

 

< Previous: 3-Valve Instrument Manifold – Direct Mount (Non-Flanged Transmitter) Next: Bleed Valve >

Produk yang Direkomendasikan

Dapatkan Penawaran

    Kami akan membalas Anda dalam waktu 24 jam. Jika untuk kasus mendesak, silakan tambahkan WhatsApp/WeChat: +86 18353183710,. Atau hubungi +86 19033618106 langsung.

    *Kami menghormati kerahasiaan Anda dan semua informasi dilindungi.

    Kami hanya akan menggunakan informasi Anda untuk merespons pertanyaan Anda dan tidak akan pernah mengirimkan email tidak diminta atau pesan promosi.