Bangku Uji Katup Keamanan Kontrol Manual

Rentang aplikasi: Uji tekanan set, tekanan mundur, dan kinerja ketat dari katup keamanan yang dipasang langsung dan katup keamanan yang dioperasikan pilot.

Beranda > Produk

Meja Uji Katup Keselamatan

Meja Uji Katup

Peralatan Uji Tekanan

Pompa Pendorong Gas

Pompa Pendorong Gas Seri OMA
Pompa Pendorong Gas Seri OMD
Pompa Pendorong Gas Seri OMT
Pompa Pendorong Udara
Sistem Pendorong Gas

Pompa Pendorong Cair

Peralatan Uji Alat Ukur Tekanan

Tabel Kalibrasi Alat Ukur Tekanan
Tabel Uji Pulsasi Kelelahan Alat Ukur Tekanan
Meja Uji Kebocoran Tekanan Alat Ukur Tekanan
Mesin Penyegel Cerdas Penutup Alat Ukur Tekanan
Mesin Kebocoran Putar Otomatis Casing Alat Ukur Tekanan
Mesin Pengisian Minyak Otomatis Alat Ukur Tekanan

Katup Manifold Instrumen

Katup Manifold Instrumen– Pemasangan Langsung (Transmitter Tanpa Flange)
Katup Manifold Instrumen – Pemasangan Langsung (Transmitter Coplanar, Flanged)
Katup Manifold Instrumen – Pemasangan Langsung (Coplanar)
Katup Manifold Instrumen – Pemasangan Jauh

Katup Jarum Tekanan Tinggi

Mesin Pengolahan Busbar

Kompresor Gas Campuran

Fitting Ferrule

Bangku Uji Katup Keamanan Kontrol Manual

Bangku Uji Katup Keamanan Kontrol Manual
Bangku Uji Katup Keamanan Kontrol Manual

pengantar produk

The MAQ Series Safety Valve Calibration Bench is a professional testing system designed for the calibration and performance verification of safety valves under controlled pressure conditions.
The equipment adopts a hydraulic clamping device with adjustable clamping force, and is equipped with a pressure gauge to display the corresponding clamping force.，The equipment is mainly used to test the set pressure, setback pressure, and tightness performance of both direct loaded safety valves and pilot operated safety valves.

With a stable pressure boosting system and reliable mechanical structure, the MAQ series calibration bench is suitable for applications where accurate pressure control and repeatable testing results are required.

Dapatkan Penawaran

Deskripsi Produk

The MAQ Series Safety Valve Calibration Bench adopts an advanced equipment design principle, integrating pneumatic and hydraulic technologies to achieve stable pressure output and secure valve clamping during testing.
In this system, pneumatic liquid pressurization is used as the clamping pressure source, while a pneumatic gas booster pump is applied as the test pressure source.
The bench is equipped with a gas cylinder, enabling continuous testing operations without frequent interruption.

During operation, the test pressure can be adjusted smoothly, and the pressure rise process remains stable, which helps operators accurately determine valve opening pressure, reseating pressure, and sealing performance.

One testing seat including one clamping unit is used for DN15~DN200 testing, and multiple testing fixtures can be equipped to meet the testing requirements of various series of safety valves.

The test bench can also be customized according to customer required size, pressure, and medium.

Item MAQ-200/10-3-N MAQ-400/40-6-BN
Testing Medium Nitrogen or clean air Nitrogen or clean air or water
Maximum Diameter DN200mm DN400mm
Tekanan Uji Maksimum 10MPa Gas pressure: 40MPa; water pressure: 80MPa
Testing Accuracy ±0.4% ±0.4%
Material The valves, fittings, and joints used in the equipment material are all made of stainless steel When the medium pressure is lower than the required pressure and not less than 3MPa, use 0.3-0.8MPa compressed air as the driving pressure source, and pressurize the medium into the high-pressure tank through a gas booster pump

Features and Functions

  • Hydraulic clamping device with adjustable clamping force
  • Equipped with a pressure gauge and clamping force comparison table
  • Adjustable test pressure with stable pressure rise
  • Suitable for testing set pressure, setback pressure, and tightness performance
  • Can be customized for different size, pressure, and medium
  • Suitable for most gas and liquid media

 

Product Advantages

  • Adjustable clamping force for different testing pressure and valve diameter
  • Pressure and clamping force comparison table for convenient operation
  • Stable pressure rise during testing
  • Suitable for testing direct loaded safety valves and pilot operated safety valves
  • Can be customized according to required size, pressure, and medium

 

Keuntungan Produk:

  • Stable pressure output improves testing accuracy and repeatability
  • Adjustable pressure control allows flexible testing of different valve specifications
  • Reliable clamping system ensures safety during high-pressure testing
  • Imported high-pressure components enhance system safety and service life
  • Supports both gas and liquid testing media, expanding application flexibility

 

Keunggulan Perusahaan Kami

Sorotan berfokus pada desain dan pembuatan peralatan uji tekanan dan sistem pengujian kontrol fluida, mendukung baik model standar maupun kustomisasi berbasis proyek.

  • 16+ tahun fokus pada peralatan uji tekanan dan sistem peningkatan pneumatik
  • Kapasitas produksi tahunan: 1000+ set peralatan
  • 8000+ pelanggan yang dilayani
  • Pelaksanaan manajemen kualitas berdasarkan ISO9001 dan kontrol manufaktur yang stabil
  • Tim teknik yang kuat untuk konfigurasi bangku uji, penyesuaian fixture, dan dukungan teknis
  • Pengalaman ekspor mendukung pembeli internasional dengan komunikasi teknis dan dokumentasi

 

Applicable Standards & Compliance:

The MAQ Series Safety Valve Calibration Bench is designed and manufactured in accordance with the following standards:

  • TSGZF001-2006
  • GB/T 12242-2005
  • GB/T 12241-2005
  • GB/T 12243-2005

These standards ensure the equipment meets the technical requirements for safety valve testing and calibration.

 

< Previous: Portable Safety Valve Test Bench Next: M-Series Pneumatic Hydraulic Pump >

Produk yang Direkomendasikan

Dapatkan Penawaran

    Kami akan membalas Anda dalam waktu 24 jam. Jika untuk kasus mendesak, silakan tambahkan WhatsApp/WeChat: +86 18353183710,. Atau hubungi +86 19033618106 langsung.

    *Kami menghormati kerahasiaan Anda dan semua informasi dilindungi.

    Kami hanya akan menggunakan informasi Anda untuk merespons pertanyaan Anda dan tidak akan pernah mengirimkan email tidak diminta atau pesan promosi.