The piston pressure gauge test station adopts a piston and piston cylinder made of cemented tungsten carbide material with high strength, high hardness and low temperature linear expansion coefficient.
After careful grinding, the piston and cylinder ensure stable performance in a wide working temperature environment.
The working pressure medium above 2.5MPa uses specially selected silicone oil with very low viscosity, ensuring that the pressure gauge has extremely high sensitivity.
The pressure adjustment system is light and labor-saving, allowing easy pressure adjustment even at 100MPa.
| Model |
Test Range (MPa) |
Accuracy |
| MDJB-6T |
0.04 – 0.6 |
±0.05%，±0.02% |
| MDJB-60T |
0.1 – 6 |
| MDJB-250T |
0.5 – 25 |
| MDJB-600T |
1 – 60 |
| MDJB-1000T |
1 – 100 |
The quality and quantity of the weights are shown in the table below.
Features and Functions
Piston and cylinder made of high-strength tungsten carbide with high hardness and low thermal expansion.
Low center of gravity load structure, ensuring stable piston operation and accurate pressure indication.
- Uses low-viscosity silicone oil as pressure medium for high sensitivity.
- Carbon steel and non-magnetic stainless steel weights ensure accurate pressure generation.
- Displacement sensor monitors piston stroke (0–3 mm) for precise indication.
- Protection system above 25 MPa prevents piston rod damage.
- Light and labor-saving pressure adjustment, easy to operate even at high pressure.
Product Advantages
- High stability tungsten carbide piston system
- Minimal piston deformation under pressure
- High pressure sensitivity and measurement accuracy
- Stable pressure output and reliable calibration performance
I Vantaggi della Nostra Azienda
Highlight si concentra sul design e sulla produzione di attrezzature per prove di pressione e sistemi di controllo fluidi, supportando sia modelli standard che personalizzazioni basate su progetti.
- Oltre 16 anni focalizzati sulle attrezzature per prove di pressione e sistemi di potenziamento pneumatico
- Capacità produttiva annuale: oltre 1000 set di attrezzature
- Oltre 8000 clienti serviti
- Implementazione della gestione della qualità basata su ISO9001 e controllo di produzione stabile
- Forti team ingegneristici per la configurazione del banco di prova, abbinamento dei dispositivi e supporto tecnico
- Esperienza nell'esportazione che supporta acquirenti internazionali con comunicazione tecnica e documentazione
Calibration Capability
The calibration table is designed for testing flange-type pressure gauges, supporting gauges with flange diameters from 15 mm to 125 mm.
The equipment can perform both vacuum pressure calibration and high-pressure liquid calibration, depending on the selected configuration.
