The MHV-HD65/64-S integrates a hydraulic system, electrical control system, high/low pressure test supply, and test fixtures into one compact station. The bench adopts a horizontal top-press structure, where the top-press cylinder applies stable clamping force to the valve during testing to ensure safe positioning and reliable sealing conditions.
The sealing interface between the valve and blind plate uses an end-face O-ring sealing method, supporting common workshop sealing requirements. The bench supports both water-based hydrostatic testing and low-pressure gas tightness test conditions (4–7 bar) as required by typical valve inspection processes.
| Категория |
Артикул |
Технические характеристики |
| Общие сведения |
Тип продукта |
Horizontal Top-Press Valve Test Bench (High-Pressure Customized) |
| Общие сведения |
Модель |
MHV-HD65/64-S |
| Общие сведения |
Valve Size Range |
DN15–DN65 (15–65 mm) |
| Sealing |
Valve–Blind Plate Sealing |
End-face O-ring sealing |
| Тестовая среда |
Среда для гидростатических испытаний |
Вода |
| Тестовая среда |
Low-Pressure Gas Tightness Condition |
4–7 bar (air or nitrogen as specified) |
| Предметы для испытаний |
Strength & Sealing Tests |
1.5× PN shell test; 1.1× PN high-pressure sealing test; 4–7 bar low-pressure gas tightness test |
| Mechanical |
Sealing Distance Range |
100–600 mm |
| Mechanical |
Pull Rod Inner Travel |
500 mm |
| Cylinder |
Top-Press Cylinder |
Ø125 mm × 1 set |
| Clamping |
Max Clamping Force |
35 tons |
| Overall Size |
Reference Dimensions |
1750 × 1250 × 1750 mm |
| Valve Size |
Nominal Pressure Range |
Диапазон испытательного давления |
| DN15 |
20.0–42.0 MPa |
1.6–64.0 MPa |
| DN20 |
16.0–42.0 MPa |
1.6–64.0 MPa |
| DN25 |
10.0–42.0 MPa |
1.6–64.0 MPa |
| DN32 |
6.4–42.0 MPa |
1.6–64.0 MPa |
| DN40 |
4.0–42.0 MPa |
1.6–64.0 MPa |
| DN50 |
2.5–42.0 MPa |
1.6–64.0 MPa |
| DN65 |
1.6–25.0 MPa |
1.6–37.5 MPa |
Характеристики и функции продукта
- Horizontal top-press clamping design for stable valve positioning during pressurization
- End-face O-ring sealing structure for practical workshop sealing requirements
Supports full valve inspection workflow:
- Hydrostatic shell strength test (1.5× PN)
- High-pressure sealing test (1.1× PN)
- Low-pressure gas tightness test at 4–7 bar
- Designed to cover DN15–DN65 valve inspection tasks with matching fixture travel and sealing distance range
- Integrated station layout combining hydraulic power, control cabinet, and test circuit for efficient operation
Преимущества продукции
- High-pressure capability for small-to-medium valves within DN15–DN65
- Stable clamping force (up to 35 tons) improves safety and repeatability during pressure testing
- Clear, standard test workflow support (strength + high-pressure sealing + low-pressure tightness)
- Compact footprint suitable for workshop QC and inspection stations
- O-ring end-face sealing provides a practical and widely accepted sealing approach for bench testing
Сила нашей компании
Highlight специализируется на разработке и производстве оборудования для испытания давлением и систем контроля жидкостей, поддерживая как стандартные модели, так и индивидуальные проекты.
- 16+ лет работы в области оборудования для испытания давлением и систем пневматического наддува
- Годовая производственная мощность: 1000+ комплектов оборудования
- 8000+ обслуживаемых клиентов
- Внедрение системы управления качеством на основе ISO9001 и стабильный контроль производства
- Сильная команда инженеров для настройки испытательного стенда, подбора приспособлений и технической поддержки
- Опыт работы с иностранными покупателями в области технической коммуникации и документации
Valve Types and Test Scope
This model is designed to support multiple common valve connection/process forms within DN15–DN65, including:
- Straight-through flange type valves
- Welded connection valves
- Threaded connection valves
The bench structure and sealing method are designed to support typical workshop inspection requirements for different valve categories commonly tested on a universal valve test stand.
