MHV-HD65/64-S 수평형 최고 압력 밸브 테스트 벤치

제품 소개

The MHV-HD65/64-S Horizontal Top-Press Valve Test Bench is a dedicated valve pressure testing machine designed for hydrostatic strength testing and sealing verification of small-to-medium valves within DN15–DN65. This model is a high-pressure customized bench built for workshop inspection tasks that require stable clamping, controlled pressurization, and repeatable test procedures.

It is suitable for typical production and inspection workflows where valves must pass shell strength tests, high-pressure sealing tests, and low-pressure gas tightness checks before delivery or maintenance release.

견적 받기

제품 설명

The MHV-HD65/64-S integrates a hydraulic system, electrical control system, high/low pressure test supply, and test fixtures into one compact station. The bench adopts a horizontal top-press structure, where the top-press cylinder applies stable clamping force to the valve during testing to ensure safe positioning and reliable sealing conditions.

The sealing interface between the valve and blind plate uses an end-face O-ring sealing method, supporting common workshop sealing requirements. The bench supports both water-based hydrostatic testing and low-pressure gas tightness test conditions (4–7 bar) as required by typical valve inspection processes.

MHV-HD65/64-S 수평형 최고 압력 밸브 테스트 벤치

카테고리	항목	사양
일반	제품 유형	Horizontal Top-Press Valve Test Bench (High-Pressure Customized)
일반	모델	MHV-HD65/64-S
일반	밸브 크기 범위	DN15–DN65 (15–65 mm)
씰링	밸브-블라인드 플레이트 씰링	종단면 O링 씰링
테스트 매체	정수압 테스트 배지	물
테스트 매체	Low-Pressure Gas Tightness Condition	4–7 bar (air or nitrogen as specified)
테스트 항목	Strength & Sealing Tests	1.5× PN shell test; 1.1× PN high-pressure sealing test; 4–7 bar low-pressure gas tightness test
기계	Sealing Distance Range	100–600 mm
기계	Pull Rod Inner Travel	500 mm
Cylinder	Top-Press Cylinder	Ø125 mm × 1 set
클램핑	최대 클램핑 힘	35 tons
Overall Size	Reference Dimensions	1750 × 1250 × 1750 mm

밸브 크기	공칭 압력 범위	테스트 압력 범위
DN15	20.0–42.0 MPa	1.6–64.0 MPa
DN20	16.0–42.0 MPa	1.6–64.0 MPa
DN25	10.0–42.0 MPa	1.6–64.0 MPa
DN32	6.4–42.0 MPa	1.6–64.0 MPa
DN40	4.0–42.0 MPa	1.6–64.0 MPa
DN50	2.5–42.0 MPa	1.6–64.0 MPa
DN65	1.6-25.0 MPa	1.6-37.5 MPa

제품 특징 및 기능

Horizontal top-press clamping design for stable valve positioning during pressurization
End-face O-ring sealing structure for practical workshop sealing requirements

Supports full valve inspection workflow:

Hydrostatic shell strength test (1.5× PN)
High-pressure sealing test (1.1× PN)
Low-pressure gas tightness test at 4–7 bar

Designed to cover DN15–DN65 valve inspection tasks with matching fixture travel and sealing distance range
Integrated station layout combining hydraulic power, control cabinet, and test circuit for efficient operation

제품 이점

High-pressure capability for small-to-medium valves within DN15–DN65
Stable clamping force (up to 35 tons) improves safety and repeatability during pressure testing
Clear, standard test workflow support (strength + high-pressure sealing + low-pressure tightness)
Compact footprint suitable for workshop QC and inspection stations
O-ring end-face sealing provides a practical and widely accepted sealing approach for bench testing

우리 회사의 강점

하이라이트는 압력 테스트 장비 및 유체 제어 테스트 시스템의 설계 및 제조에 중점을 두고 표준 모델과 프로젝트 기반 사용자 지정을 모두 지원합니다.

16년 이상 압력 테스트 장비 및 공압 부스팅 시스템에 주력해 왔습니다.
연간 생산 능력: 1000세트 이상의 장비
8000명 이상의 고객에게 서비스 제공
ISO9001 기반 품질 관리 구현 및 안정적인 제조 관리
테스트 벤치 구성, 픽스처 매칭 및 기술 지원을 위한 강력한 엔지니어링 팀
기술 커뮤니케이션 및 문서화를 통해 해외 바이어를 지원한 수출 경험

Valve Types and Test Scope

This model is designed to support multiple common valve connection/process forms within DN15–DN65, including:

Straight-through flange type valves
Welded connection valves
Threaded connection valves

The bench structure and sealing method are designed to support typical workshop inspection requirements for different valve categories commonly tested on a universal valve test stand.

< Previous: MHV-HB600/24-S Horizontal Clamp-Type Valve Test Bench Next: MHV-HD300/37.5-S Horizontal Top-Pressure Valve Test Bench >