The MHV-HD65/64-S integrates a hydraulic system, electrical control system, high/low pressure test supply, and test fixtures into one compact station. The bench adopts a horizontal top-press structure, where the top-press cylinder applies stable clamping force to the valve during testing to ensure safe positioning and reliable sealing conditions.
The sealing interface between the valve and blind plate uses an end-face O-ring sealing method, supporting common workshop sealing requirements. The bench supports both water-based hydrostatic testing and low-pressure gas tightness test conditions (4–7 bar) as required by typical valve inspection processes.
| Category |
Mặt hàng |
Thông số kỹ thuật |
| General |
Loại sản phẩm |
Horizontal Top-Press Valve Test Bench (High-Pressure Customized) |
| General |
Mẫu |
MHV-HD65/64-S |
| General |
Valve Size Range |
DN15–DN65 (15–65 mm) |
| Sealing |
Valve–Blind Plate Sealing |
End-face O-ring sealing |
| Test Medium |
Hydrostatic Test Medium |
Water |
| Test Medium |
Low-Pressure Gas Tightness Condition |
4–7 bar (air or nitrogen as specified) |
| Test Items |
Strength & Sealing Tests |
1.5× PN shell test; 1.1× PN high-pressure sealing test; 4–7 bar low-pressure gas tightness test |
| Mechanical |
Sealing Distance Range |
100–600 mm |
| Mechanical |
Pull Rod Inner Travel |
500 mm |
| Cylinder |
Top-Press Cylinder |
Ø125 mm × 1 set |
| Clamping |
Max Clamping Force |
35 tons |
| Overall Size |
Reference Dimensions |
1750 × 1250 × 1750 mm |
| Valve Size |
Nominal Pressure Range |
Test Pressure Range |
| DN15 |
20.0–42.0 MPa |
1.6–64.0 MPa |
| DN20 |
16.0–42.0 MPa |
1.6–64.0 MPa |
| DN25 |
10.0–42.0 MPa |
1.6–64.0 MPa |
| DN32 |
6.4–42.0 MPa |
1.6–64.0 MPa |
| DN40 |
4.0–42.0 MPa |
1.6–64.0 MPa |
| DN50 |
2.5–42.0 MPa |
1.6–64.0 MPa |
| DN65 |
1.6–25.0 MPa |
1.6–37.5 MPa |
Product Features and Functions
- Horizontal top-press clamping design for stable valve positioning during pressurization
- End-face O-ring sealing structure for practical workshop sealing requirements
Supports full valve inspection workflow:
- Hydrostatic shell strength test (1.5× PN)
- High-pressure sealing test (1.1× PN)
- Low-pressure gas tightness test at 4–7 bar
- Designed to cover DN15–DN65 valve inspection tasks with matching fixture travel and sealing distance range
- Integrated station layout combining hydraulic power, control cabinet, and test circuit for efficient operation
Ưu điểm của sản phẩm
- High-pressure capability for small-to-medium valves within DN15–DN65
- Stable clamping force (up to 35 tons) improves safety and repeatability during pressure testing
- Clear, standard test workflow support (strength + high-pressure sealing + low-pressure tightness)
- Compact footprint suitable for workshop QC and inspection stations
- O-ring end-face sealing provides a practical and widely accepted sealing approach for bench testing
Our Company Strength
Highlight chuyên về thiết kế và sản xuất thiết bị thử áp lực và hệ thống kiểm tra điều khiển lưu chất, cung cấp cả các mẫu tiêu chuẩn lẫn các giải pháp tùy chỉnh theo yêu cầu dự án.
- Hơn 16 năm chuyên về thiết bị thử áp lực và hệ thống tăng áp khí nén
- Công suất sản xuất hàng năm: Hơn 1.000 bộ thiết bị
- Đã phục vụ hơn 8.000 khách hàng
- Triển khai hệ thống quản lý chất lượng theo tiêu chuẩn ISO 9001 và kiểm soát sản xuất ổn định
- Đội ngũ kỹ sư giàu kinh nghiệm chuyên về thiết lập hệ thống thử nghiệm, điều chỉnh thiết bị cố định và hỗ trợ kỹ thuật
- Có kinh nghiệm xuất khẩu trong việc hỗ trợ khách hàng quốc tế về truyền thông kỹ thuật và tài liệu kỹ thuật
Valve Types and Test Scope
This model is designed to support multiple common valve connection/process forms within DN15–DN65, including:
- Straight-through flange type valves
- Welded connection valves
- Threaded connection valves
The bench structure and sealing method are designed to support typical workshop inspection requirements for different valve categories commonly tested on a universal valve test stand.
