Banco di prova per valvole orizzontali a pressione dall'alto MHV-HD65/64-S

introduzione del prodotto

The MHV-HD65/64-S Horizontal Top-Press Valve Test Bench is a dedicated valve pressure testing machine designed for hydrostatic strength testing and sealing verification of small-to-medium valves within DN15–DN65. This model is a high-pressure customized bench built for workshop inspection tasks that require stable clamping, controlled pressurization, and repeatable test procedures.

It is suitable for typical production and inspection workflows where valves must pass shell strength tests, high-pressure sealing tests, and low-pressure gas tightness checks before delivery or maintenance release.

Richiedi un preventivo

Descrizione del prodotto

The MHV-HD65/64-S integrates a hydraulic system, electrical control system, high/low pressure test supply, and test fixtures into one compact station. The bench adopts a horizontal top-press structure, where the top-press cylinder applies stable clamping force to the valve during testing to ensure safe positioning and reliable sealing conditions.

The sealing interface between the valve and blind plate uses an end-face O-ring sealing method, supporting common workshop sealing requirements. The bench supports both water-based hydrostatic testing and low-pressure gas tightness test conditions (4–7 bar) as required by typical valve inspection processes.

Banco di prova per valvole orizzontali a pressione dall'alto MHV-HD65/64-S

Categoria	Articolo	Specifiche
Generale	Tipo di prodotto	Horizontal Top-Press Valve Test Bench (High-Pressure Customized)
Generale	Modello	MHV-HD65/64-S
Generale	Gamma di dimensioni della valvola	DN15–DN65 (15–65 mm)
Sigillatura	Guarnizione valvola-piastra cieca	Guarnizione O-ring di estremità
Mezzo di prova	Mezzo di prova idrostatico	Acqua
Mezzo di prova	Low-Pressure Gas Tightness Condition	4–7 bar (air or nitrogen as specified)
Articoli del test	Strength & Sealing Tests	1.5× PN shell test; 1.1× PN high-pressure sealing test; 4–7 bar low-pressure gas tightness test
Mechanical	Sealing Distance Range	100–600 mm
Mechanical	Pull Rod Inner Travel	500 mm
Cylinder	Top-Press Cylinder	Ø125 mm × 1 set
Serraggio	Forza di serraggio massima	35 tons
Overall Size	Reference Dimensions	1750 × 1250 × 1750 mm

Dimensione della valvola	Intervallo di pressione nominale	Intervallo di pressione di prova
DN15	20.0–42.0 MPa	1.6–64.0 MPa
DN20	16.0–42.0 MPa	1.6–64.0 MPa
DN25	10.0–42.0 MPa	1.6–64.0 MPa
DN32	6.4–42.0 MPa	1.6–64.0 MPa
DN40	4.0–42.0 MPa	1.6–64.0 MPa
DN50	2.5–42.0 MPa	1.6–64.0 MPa
DN65	1,6-25,0 MPa	1,6-37,5 MPa

Caratteristiche e funzioni del prodotto

Horizontal top-press clamping design for stable valve positioning during pressurization
End-face O-ring sealing structure for practical workshop sealing requirements

Supports full valve inspection workflow:

Hydrostatic shell strength test (1.5× PN)
High-pressure sealing test (1.1× PN)
Low-pressure gas tightness test at 4–7 bar

Designed to cover DN15–DN65 valve inspection tasks with matching fixture travel and sealing distance range
Integrated station layout combining hydraulic power, control cabinet, and test circuit for efficient operation

Vantaggi del prodotto

High-pressure capability for small-to-medium valves within DN15–DN65
Stable clamping force (up to 35 tons) improves safety and repeatability during pressure testing
Clear, standard test workflow support (strength + high-pressure sealing + low-pressure tightness)
Compact footprint suitable for workshop QC and inspection stations
O-ring end-face sealing provides a practical and widely accepted sealing approach for bench testing

La nostra forza aziendale

Highlight si concentra sul design e sulla produzione di attrezzature per prove di pressione e sistemi di controllo fluidi, supportando sia modelli standard che personalizzazioni basate su progetti.

Oltre 16 anni focalizzati sulle attrezzature per prove di pressione e sistemi di potenziamento pneumatico
Capacità produttiva annuale: oltre 1000 set di attrezzature
Oltre 8000 clienti serviti
Implementazione della gestione della qualità basata su ISO9001 e controllo di produzione stabile
Forti team ingegneristici per la configurazione del banco di prova, abbinamento dei dispositivi e supporto tecnico
Esperienza nell'esportazione che supporta acquirenti internazionali con comunicazione tecnica e documentazione

Valve Types and Test Scope

This model is designed to support multiple common valve connection/process forms within DN15–DN65, including:

Straight-through flange type valves
Welded connection valves
Threaded connection valves

The bench structure and sealing method are designed to support typical workshop inspection requirements for different valve categories commonly tested on a universal valve test stand.

< Previous: MHV-HB600/24-S Horizontal Clamp-Type Valve Test Bench Next: MHV-HD300/37.5-S Horizontal Top-Pressure Valve Test Bench >