Bangku Uji Katup Tekanan Atas Horisontal MHV-HD600/37.5-S

pengantar produk

The MHV-HD600/37.5-S Horizontal Top-Press Valve Test Bench is a dedicated valve pressure testing machine designed for hydrostatic shell strength testing, high-pressure sealing tests, and low-pressure gas tightness inspection of larger valves in the DN150–DN600 range. It is built as a high-capacity horizontal test station for workshop and inspection environments where stable clamping, controlled pressurization, and repeatable test procedures are required.

Dapatkan Penawaran

Deskripsi Produk

The MHV-HD600/37.5-S integrates a complete valve testing station layout, combining the hydraulic system, electrical control system, high/low pressure water supply system, fixtures, and a horizontal top-press clamping mechanism into one unit.

The bench adopts a horizontal top-press structure, where the top-press cylinder provides stable axial pressing to ensure reliable positioning during pressurization. The sealing between the valve and blind plate uses end-face O-ring sealing, supporting workshop sealing requirements for strength and tightness verification.

In operation, the high-pressure water pump is driven by an 8 bar pneumatic system and works with the electrical directional valve for reciprocating operation, continuously supplying pressure to the tested valve through check-valve switching.

Bangku Uji Katup Tekanan Atas Horisontal MHV-HD600/37.5-S

Kategori	Item	Spesifikasi
Umum	Jenis Produk	Horizontal Top-Press Valve Test Bench
Umum	Model	MHV-HD600/37.5-S
Umum	Rentang Ukuran Katup	DN150–DN600 (150–600 mm)
Penyegelan	Penyegelan Pelat Katup-Buta	Penyegelan cincin-O di bagian ujung muka
Tes Medium	Media Uji Hidrostatik	Air
Tes Medium	Kondisi Kedap Udara pada Tekanan Rendah	4-7 bar (udara atau nitrogen)
Item Tes	Ruang Lingkup Uji	1.5× PN shell strength test; 1.1× PN high-pressure sealing test; 4–7 bar low-pressure gas tightness test
Mekanik	Tested Valve Face-to-Face Length	432–1143 mm
Mekanik	Sealing Disc Spacing Range	400–1250 mm
Mekanik	Jarak Perpindahan Batang Tarik Bagian Dalam	1050 mm
Silinder	Silinder Top-Press	Ø380 mm
Menjepit	Kekuatan Penjepit Maks	320 tons

Diameter Nominal	Nominal Pressure	Uji Tekanan
DN150	6.4–25.0 MPa	6.4–37.5 MPa
DN200	4.0–25.0 MPa	4.0–37.5 MPa
DN250	2.5–25.0 MPa	2.5–37.5 MPa
DN300	1,6–16,0 MPa	1,6–24,0 MPa
DN350	1,6-10,0 MPa	1,6-15,0 MPa
DN400	1,6-10,0 MPa	1,6-15,0 MPa
DN450	1,6–6,4 MPa	1,6-9,6 MPa
DN500	1.6–5.0 MPa	1.6–7.5 MPa
DN600	1.6–5.0 MPa	1.6–7.5 MPa

Fitur dan Fungsi Produk

Horizontal top-press clamping design suitable for DN150–DN600 valve pressure testing
End-face O-ring sealing between valve and blind plate

Supports complete inspection workflow:

Uji kekuatan cangkang hidrostatik (1,5× PN)
Uji kedap tekanan tinggi (1,1× PN)
Uji kedap gas bertekanan rendah pada 4–7 bar

High clamping capacity (320 tons) to secure large valves during pressurization
Broad mechanical adaptability with valve length coverage 432–1143 mm
High-pressure water pump driven by 8 bar pneumatic system with electrical directional valve for reciprocating operation and continuous pressure supply

Keunggulan Produk

Heavy-duty capacity for large valve testing: DN150–DN600 with 320-ton clamping force support
Standardized test workflow coverage: strength + sealing + low-pressure tightness in one station
Practical sealing method: end-face O-ring sealing for workshop inspection use
Wide fixture travel and spacing range supports different valve sizes without frequent re-fixturing
Stable pressure supply principle (pneumatic-driven high-pressure pump + directional valve reciprocation) supports repeated inspection cycles

Kekuatan Perusahaan Kami

Highlight mengkhususkan diri pada peralatan pengujian tekanan dan sistem pengujian kontrol fluida, mendukung model standar dan konfigurasi berbasis proyek:

16+ tahun fokus pada peralatan uji tekanan dan sistem peningkatan pneumatik
Kapasitas produksi tahunan: 1000+ set peralatan
8000+ pelanggan yang dilayani
Dukungan tim teknik untuk pencocokan perlengkapan, pemilihan konfigurasi, dan komunikasi teknis
Implementasi manajemen mutu berbasis ISO9001 dan proses manufaktur yang stabil
Pengalaman dukungan ekspor untuk pembeli internasional dengan dokumentasi dan bantuan teknis

< Previous: MHV-HD300/37.5-S Horizontal Top-Pressure Valve Test Bench Next: MHV-HD1000/15-S Horizontal Top-Pressure Valve Test Bench >