Uji Katup Kupu-Kupu Tipe Penjepit Horisontal MDV-2000/3.75-S

Untuk inspeksi industri, kontrol kualitas, dan pengujian keselamatan di industri seperti minyak dan gas, pembangkit listrik, dan sistem tekanan tinggi.

Meja Uji Katup Keselamatan

Meja Uji Katup

Peralatan Uji Tekanan

Tank Accessory Test bench

Pompa Pendorong Gas

Pompa Pendorong Gas Seri OMA
Pompa Pendorong Gas Seri OMD
Pompa Pendorong Gas Seri OMT
Pompa Pendorong Udara
Sistem Pendorong Gas

Pompa Pendorong Cair

Peralatan Uji Alat Ukur Tekanan

Tabel Kalibrasi Alat Ukur Tekanan
Tabel Uji Pulsasi Kelelahan Alat Ukur Tekanan
Meja Uji Kebocoran Tekanan Alat Ukur Tekanan
Mesin Penyegel Cerdas Penutup Alat Ukur Tekanan
Mesin Kebocoran Putar Otomatis Casing Alat Ukur Tekanan
Mesin Pengisian Minyak Otomatis Alat Ukur Tekanan

Katup Manifold Instrumen

Katup Manifold Instrumen– Pemasangan Langsung (Transmitter Tanpa Flange)
Katup Manifold Instrumen – Pemasangan Langsung (Transmitter Coplanar, Flanged)
Katup Manifold Instrumen – Pemasangan Langsung (Coplanar)
Katup Manifold Instrumen – Pemasangan Jauh

Katup Jarum Tekanan Tinggi

Mesin Pengolahan Busbar

Kompresor Gas Campuran

Fitting Ferrule

Uji Katup Kupu-Kupu Tipe Penjepit Horisontal MDV-2000/3.75-S

pengantar produk

The MDV-2000/3.75-S Horizontal Claw-Type Butterfly Valve Test Bench is a pressure testing bench used for butterfly valves and check valves. It is applicable to straight-through flanged or wafer-type butterfly valves within DN1000–DN2000.

Dapatkan Penawaran

Deskripsi Produk

MDV-2000/3.75-S integrates the hydraulic system, electrical control system, high/low-pressure water pump pressure supply device, oil pressure / water pressure / gas pressure instrumentation system, control valve system, clamping worktable system, and medium circulation storage tank.

The bench uses a claw-type clamping structure to clamp the valve flange end face. The clamping force is adjustable. The sealing between the butterfly valve and blind plate uses an end-face O-ring sealing method, and the leakage position can be observed.

Uji Katup Kupu-Kupu Tipe Penjepit Horisontal MDV-2000/3.75-S

Kategori Item Spesifikasi
Umum Equipment Type Butterfly Valve Test Bench (Horizontal Claw Type)
Umum Model MDV-2000/3.75-S
Rentang Uji Diameter Nominal DN1000–DN2000
Test Valve Type Applicable Valves Straight-through flanged or wafer-type butterfly valves
Installation Metode Penjepitan Claw clamping at end face; clamping force adjustable
Penyegelan Penyegelan Pelat Katup-Buta Penyegelan cincin-O di bagian ujung muka
Tes Medium Hydrostatic Test Air
Tes Medium Low-Pressure Gas Tightness Test 4–7 bar low-pressure gas (air or nitrogen)
Item Tes Completed Tests 1.5×PN hydrostatic shell test; 1.1×PN high-pressure hydrostatic sealing test; 4–7 bar low-pressure gas tightness test
Rentang Uji Ruang Lingkup Uji DN1000–DN2000 (refer to pressure table)
Mechanical Butterfly Valve Structure Length 410–760 mm
Mechanical Butterfly Valve Flange OD Ø1175–Ø2325 mm
Mechanical Claw Disc Spacing 750–1250 mm (with 300 mm reserved space)
Cylinders Clamping Cylinders 6 × Ø260 mm
Rods Piston Rod Ø130 mm
Force Kekuatan Penjepit Maks 630 tons

 

Diameter Nominal Nominal Pressure Rentang Tekanan Uji
DN1000 0.25–2.5 MPa 0.25–3.75 MPa
DN1200 0.25–2.5 MPa 0.25–3.75 MPa
DN1400 0.25–1.6 MPa 0.25–2.4 MPa
DN1600 0.25–1.6 MPa 0.25–2.4 MPa
DN1800 0.25–1.0 MPa 0.25–1.5 MPa
DN2000 0.25–1.0 MPa 0.25–1.5 MPa

Fitur dan Fungsi Produk

  • Test valve type: straight-through flanged or wafer-type butterfly valves
  • Installation method: claw clamping at end face, adjustable clamping force, minimal external influence
  • Sealing method: end-face O-ring sealing, leakage position can be observed
  • Test media: water; 4–7 bar low-pressure gas (air or nitrogen)
  • Completed test items: 1.5×PN hydrostatic shell test; 1.1×PN high-pressure hydrostatic sealing test; 4–7 bar low-pressure gas tightness test
  • Test range: DN1000–DN2000 (refer to the test pressure table)

 

Keunggulan Produk

  • Covers DN1000–DN2000 butterfly valve testing range on one bench
  • Provides specified strength + sealing + low-pressure gas tightness tests
  • Mechanical adaptation ranges match large valve sizes (length, flange OD, disc spacing)
  • High clamping capacity: 630 tons (as specified)

 

Kekuatan Perusahaan Kami

Highlight mengkhususkan diri pada peralatan pengujian tekanan dan sistem pengujian kontrol fluida, mendukung model standar dan konfigurasi berbasis proyek:

  • 16+ tahun fokus pada peralatan uji tekanan dan sistem peningkatan pneumatik
  • Kapasitas produksi tahunan: 1000+ set peralatan
  • 8000+ pelanggan yang dilayani
  • Dukungan tim teknik untuk pencocokan perlengkapan, pemilihan konfigurasi, dan komunikasi teknis
  • Implementasi manajemen mutu berbasis ISO9001 dan proses manufaktur yang stabil
  • Pengalaman dukungan ekspor untuk pembeli internasional dengan dokumentasi dan bantuan teknis

 

Water & Air Circuit and Product Configuration

A) Water & Air Circuit Functional Notes (as specified)

  • Low-pressure pump: self-priming, large-flow water filling; full-load pressure 0–1.6 MPa
  • High-pressure pump: driven by the hydraulic system to reciprocate the plunger; pressure range 1.6–10.0 MPa
  • Water/air pipeline: one-way pressurization and pressure relief; audible and visual alarm when holding time is reached
  • Bottom circulation storage medium tank; rust inhibitor (powder) is added as specified to reduce corrosion

B) Product Configuration (as specified)

  • High-pressure water pump: Jinan ODMT Fluid Control Equipment Co., Ltd.
  • Sealing parts: O-ring imported (Taiwan); oil cylinder seals use Taiwan special TPU sealing material
  • Piston rod: 40Cr, hardness HRC28–32, surface hard chrome plating
  • Hydraulic oil piping material: Q35 seamless steel pipe
  • Water pipeline control valve: soft-seal valve
  • Hydraulic manifold block: pickling & cleaning treatment
  • Hydraulic pipelines and water pipelines: pickling & cleaning treatment

C) After-Sales (Domestic, as specified)

  • Remote video guidance after equipment arrives on site
  • Warranty period: 12 months
  • Long-term supply of parts after warranty

D) Required by User (as specified)

46# anti-wear hydraulic oil, cables, and 8 bar air source

< Previous: MDV-1200/15-2S Horizontal Clamp-Type Butterfly Valve Test Bench Next: Gas Booster System >

Produk yang Direkomendasikan

Dapatkan Penawaran

    Kami akan membalas Anda dalam waktu 24 jam. Jika untuk kasus mendesak, silakan tambahkan WhatsApp/WeChat: +86 18353183710,. Atau hubungi +86 19033618106 langsung.

    *Kami menghormati kerahasiaan Anda dan semua informasi dilindungi.

    Kami hanya akan menggunakan informasi Anda untuk merespons pertanyaan Anda dan tidak akan pernah mengirimkan email tidak diminta atau pesan promosi.