The MHV-HD65/64-S integrates a hydraulic system, electrical control system, high/low pressure test supply, and test fixtures into one compact station. The bench adopts a horizontal top-press structure, where the top-press cylinder applies stable clamping force to the valve during testing to ensure safe positioning and reliable sealing conditions.
The sealing interface between the valve and blind plate uses an end-face O-ring sealing method, supporting common workshop sealing requirements. The bench supports both water-based hydrostatic testing and low-pressure gas tightness test conditions (4–7 bar) as required by typical valve inspection processes.
| Kategori |
Öğe |
Şartname |
| Genel |
Ürün Tipi |
Horizontal Top-Press Valve Test Bench (High-Pressure Customized) |
| Genel |
Model |
MHV-HD65/64-S |
| Genel |
Valf Boyut Aralığı |
DN15–DN65 (15–65 mm) |
| Sızdırmazlık |
Valf-Kör Plaka Sızdırmazlığı |
Uç yüz O-ring sızdırmazlık |
| Test Ortamı |
Hidrostatik Test Ortamı |
Su |
| Test Ortamı |
Low-Pressure Gas Tightness Condition |
4–7 bar (air or nitrogen as specified) |
| Test Öğeleri |
Strength & Sealing Tests |
1.5× PN shell test; 1.1× PN high-pressure sealing test; 4–7 bar low-pressure gas tightness test |
| Mechanical |
Sealing Distance Range |
100–600 mm |
| Mechanical |
Pull Rod Inner Travel |
500 mm |
| Cylinder |
Top-Press Cylinder |
Ø125 mm × 1 set |
| Sıkıştırma |
Maksimum Sıkma Kuvveti |
35 tons |
| Overall Size |
Reference Dimensions |
1750 × 1250 × 1750 mm |
| Valf Boyutu |
Nominal Basınç Aralığı |
Test Basınç Aralığı |
| DN15 |
20.0–42.0 MPa |
1.6–64.0 MPa |
| DN20 |
16.0–42.0 MPa |
1.6–64.0 MPa |
| DN25 |
10.0–42.0 MPa |
1.6–64.0 MPa |
| DN32 |
6.4–42.0 MPa |
1.6–64.0 MPa |
| DN40 |
4.0–42.0 MPa |
1.6–64.0 MPa |
| DN50 |
2.5–42.0 MPa |
1.6–64.0 MPa |
| DN65 |
1.6-25.0 MPa |
1,6-37,5 MPa |
Ürün Özellikleri ve Fonksiyonları
- Horizontal top-press clamping design for stable valve positioning during pressurization
- End-face O-ring sealing structure for practical workshop sealing requirements
Supports full valve inspection workflow:
- Hydrostatic shell strength test (1.5× PN)
- High-pressure sealing test (1.1× PN)
- Low-pressure gas tightness test at 4–7 bar
- Designed to cover DN15–DN65 valve inspection tasks with matching fixture travel and sealing distance range
- Integrated station layout combining hydraulic power, control cabinet, and test circuit for efficient operation
Ürün Avantajları
- High-pressure capability for small-to-medium valves within DN15–DN65
- Stable clamping force (up to 35 tons) improves safety and repeatability during pressure testing
- Clear, standard test workflow support (strength + high-pressure sealing + low-pressure tightness)
- Compact footprint suitable for workshop QC and inspection stations
- O-ring end-face sealing provides a practical and widely accepted sealing approach for bench testing
Şirket Gücümüz
Vurgulamak gerekir ki, basınç testi ekipmanları ve akış kontrol test sistemlerinin tasarım ve üretimine odaklanıyoruz, hem standart modelleri hem de proje bazlı özelleştirme desteklemekteyiz.
- Basınç testi ekipmanları ve pnömatik destek sistemlerine yönelik 16+ yıl odaklanma
- Yıllık üretim kapasitesi: 1000+ ekipman seti
- 8000+ müşteri hizmeti
- ISO9001 tabanlı kalite yönetimi uygulanması ve stabil üretim kontrolü
- Test masası yapılandırması, aparat eşleştirme ve teknik destek için güçlü mühendislik ekibi
- Uluslararası alıcılarla teknik iletişim ve dokümantasyon desteği sunan ihracat deneyimi
Valve Types and Test Scope
This model is designed to support multiple common valve connection/process forms within DN15–DN65, including:
- Straight-through flange type valves
- Welded connection valves
- Threaded connection valves
The bench structure and sealing method are designed to support typical workshop inspection requirements for different valve categories commonly tested on a universal valve test stand.
English 
Français 
Русский 
Español 
Português 
العربية 
Tiếng Việt 
한국어 
Bahasa Indonesia 
Deutsch 
Türkçe 
Italiano